25
Setting the Sleep Timer
When the CD-Receiver is turned on, repeatedly press the
SLEEP
button to select a set period of
time (in minutes): 120, 90, 60, 45, 30, 15.
When the Sleep Timer is activated, the [SLEEP] is displayed on the Display.
To deactivate the Sleep Timer
Press the
SLEEP
button repeatedly until [SLEEP OFF] is displayed on the Display.
When the Sleep Timer is deactivated, [SLEEP] is not displayed.
Setting the Alarm Timer
This unit can be used as an alarm timer (clock).
Note!
Make sure that you have set the Clock correctly.
1.
In the Standby mode, press and hold the
TIMER
button,
until [TIMER SET] scrolls on the display
and
the input is displayed, e.g. DISC.
2. Press the
►►
l
,
l
◄◄
buttons on the front panel or
,
buttons on the remote controller to
select an input.
3.
Press the
TIMER
button,
the hour indicator will blink.
4.
Repeat steps 2-3 to set the hour, minute and adjust the volume.
Note!
•
To exit the Alarm Timer setting mode without storing, press the ■ button.
•
If no button is pressed in 90 seconds, the unit exits the Clock setting mode automatically.
•
If the CD/USB input is selected, and no disc or USB Flash Drive is inserted or an incompatible
format is detected, the TUNER input will be activated automatically.
To deactivate or re-activate the Alarm Timer
In the Standby mode, press the
TIMER
button to activate or deactivate the Alarm Timer.
•
If the Alarm Timer is activated, [
] is displayed on the Display.
•
If the Alarm Timer is deactivated, [
] is not displayed.
Summary of Contents for HTR-1000CD
Page 1: ...HTR 1000CD v 2 HYBRID STEREO CD RECEIVER Instruction Manual Edition 04 2021 ...
Page 29: ...29 Notes ...
Page 30: ...30 Notes ...
Page 31: ...31 Notes ...
