18
Operation
DAB radio operation
Note!
•
Make sure that you have correctly connected and fully extended the antenna.
•
You can program up to 30 DAB radio stations.
Program DAB radio stations automatically
1. Rotate the
INPUT
knob on the front panel or repeatedly press the
button on the remote
controller to select the DAB input. The word [DAB] will be displayed on the Display.
2. Press the
SCAN
button to activate the automatic Program mode.
• [SCANING] is displayed.
• All available stations are programmed and stored.
•
The first programmed radio station is broadcasted automatically.
Program DAB radio stations manually
1. Tune to a radio station.
2. Press the
PROG
button to activate the Program mode.
• The preset number will blink.
3.
Press the
PRESET
►
l
/
l
◄ buttons to allocate a number to this radio station.
Note!
If you select a number higher than 30, then the preset number will be changed to “1” auto
-
matically.
4. Press the
PROG
button again to store the station.
5. Repeat above steps 1 to 4 for each station you want to store in the memory with a preset
number.
Tuning to a DAB radio station
Repeatedly press the ►►
l
/
l
◄◄ buttons on the front panel or ►► / ◄◄ buttons on the remote
controller to change the frequency until you find the station you want.
Tuning to programmed (Preset) DAB Stations
• Press the
0-9, 10+, PRESET
►
l
/
l
◄ buttons until the desired preset number is displayed.
The unit will tune to the selected station automatically.
◦ If the preset number is less than 10, press the number buttons 1-9.
◦ If the preset number is over 10, press 10+ button and press the one of the number buttons 0-9.
Note!
If the preset number over 20, press 10+ button twice and press the one of the number
buttons 0-9.
Summary of Contents for HTR-1000CD
Page 1: ...HTR 1000CD v 2 HYBRID STEREO CD RECEIVER Instruction Manual Edition 04 2021 ...
Page 29: ...29 Notes ...
Page 30: ...30 Notes ...
Page 31: ...31 Notes ...
