manualshive.com logo in svg

Taga Harmony HTR-1000CD, Instruction Manual, Page: 19 / 32

Share
Download
Taga Harmony HTR-1000CD Instruction Manual Download Page 19

19

Operation

DAB Information Display

 

Depending on the DAB radio station you are tuning to, some information may be unavailable. 

 

Repeatedly press the 

INFO

 button to display the following information.

•  Station Name

 

When an DAB station is received, the name of that station will be displayed.

•  Ensemble Name

 

A multiplex is a collection of radio stations that are bundled and transmitted on one frequency. 

There are national and local multiplexes. Local ones contain stations that are specific to that area.

 

Note!

 DAB – unlike the normal radio, groups together several radio stations and transmits them

 

on one frequency.

•  Clock

 

Displays the current time provided automatically by the broadcaster.

•  Date

 

Displays the current date provided automatically by the broadcaster.

•  DLS (Dynamic Label Segment)

 

Dynamic label segment is a scrolling message that the broadcasters may include with their trans-

missions. The message usually includes information, such as program details etc.

•  Signal Strength

 

Shows a number to indicate the signal strength which is between 0 and 100, for example 15,

 

80 or 100. The stronger the signal, the higher the number.

•  Program Type

 

Describes the style or genre of the program that is being broadcast.

•  Frequency

 

Displays the frequency of the current station.

•  Audio Bit Rate

 

Displays the digital audio bit rate being received.

•  Stereo/Mono

 

The Display will show if the station being received is in mono or stereo.

FM radio operation

Note!

• 

Make sure that you have correctly connected and fully extended the DAB/FM antenna.

• 

You can program up to 20 FM radio stations.

Tuning in to a Station

1. Rotate the 

INPUT

 knob on the front panel or repeatedly press the 

 button on the remote 

controller to select the TUNER input. The word [TUNER] will be displayed on the Display.

2. 

Select a station using one of the following methods:

•  Auto Tuning 

Press and hold the ►►

l 

/ 

l

◄◄ buttons on the front panel or ◄◄ / ►► buttons on the remote 

controller for one second or more, the frequency changes down or up automatically until

 

a station is found.

•  Manual Tuning 

Repeatedly press the ►►

l 

/ 

l

◄◄ buttons on the front panel or ◄◄ / ►►buttons on the remo

-

te controller to change the frequency until you find the station you want.

•  Preset Tuning (available only after the stations are programmed)

 

Repeatedly press the 

0-9, 10+, PRESET

 ►

l 

/ 

l

◄ buttons to select the desired preset number.  

The unit will tune to the selected station automatically. 

◦ If the preset number is less than 10, press the number buttons 1-9.

 

◦ If the preset number is over 10, press 10+ button and press the one of the number buttons 0-9.

 

Note!

 If the preset number over 20, press 10+ button twice and press the one of the number 

buttons 0-9.

Summary of Contents for HTR-1000CD

































Reviews:

No comments