5-8
Setup Configuration Utility (SCU)
Allows you to assign COM1/COM2/COM3/COM4 to specific functions
that you wish to use. In general, COM1/COM4 can be assigned to
RS-232C
(serial port), COM2 can be assigned to
IR
(InfraRed), while
COM3 can be assigned to
touchscreen
. Select
Disabled
if you need the
resources (3F8/IRQ4 of COM1, 2F8/IRQ3 of COM2, 3E8/IRQ5 of
COM3, 2E8/IRQ11 of COM4) for other devices. Sets the communication
compatibility mode for the IR port.
The item
Mode Setting For COM2
sets the communication
compatibility mode according to the type of the IR device to be
connected. The options are
IrDA (HPSIR)
and
Fast IR
. This item is not
valid for setting if the previous item
COM2 Settings
is set at
Disabled
.
LPT Port
The item
Port Address
sets the address for the LPT port (parallel port).
The options are
378/IRQ7
of
LPT1
,
278/IRQ5
of
LPT2
,
3BC/IRQ7
of
LPT3
.
The item
Port Definition
sets the LPT port (parallel port) mode
supported by the parallel device you are using. Your system supports
Standard AT (Centronics)
,
Bi-directional (PS-2)
,
EPP (Enhanced
Parallel Port)
and
ECP (Extended Capabilities Port)
standards that turn
the standard parallel port into a high-speed bi-directional peripheral port.
