PSM192 video
outputs
configuring the
PSM192 video
outputs
PSM192 external
video source
inputs
The PSM192 offers analog component video and digital video (DVI).
DVI has its own connector
DVI OUTPUT
on the rear panel of your
player. The analog outputs are available on the player’s BNC
COMPONENT VIDEO
connections.
The normal interlaced component video signals remain available on
the RCA
COMPONENT VIDEO
connections.
For best quality the DVD32R should be configured for
COMPONENT
output. This is done in the
change setup
>
video
setup menu.
The digital and analog video outputs can be configured as
component (YPbPr) or RGsB (i.e. RGB with sync on green). The output
mode can be changed only when the player does not have a disc
loaded. To change output mode, remove any disc that is loaded,
close the door, and wait for the
no disc
message to appear. To select
COMPONENT
press the number keys corresponding to the letters
COM
, i.e.
2
,
6
,
6
on the system remote. To select RGB press the
number keys corresponding to the letters
RGB
, i.e.
7
,
4
,
2
.
The PSM192 provides for your external video sources, composite and
S-Video inputs via the upper
COMPOSITE
and
S-VIDEO
connectors on
the player‘s rear panel.
46
Progressive Scan Module PSM192 (option)
GRR00876.03-DVD32R UM v3.7.qxd 8/28/02 2:14 PM Page 46
