11
getting started
before you start
We know that you are keen to get your DVD32R working. This
section describes the connections required to make your DVD32R
fully functional and have you viewing your favourite movies as
quickly as possible. Refer to page 2 for diagrams to help you find
your way around your DVD32R
(1)
.
Make sure that all components of your audio-visual system are
disconnected from the AC supply whenever you change any
connections.
After removing the DVD32R from its packing, most carefully
remove the tape (A) and the protective film (B) from its cover.
Carefully open the drawer by hand to remove the transport
protection inside the drawer.
Older DVD32Rs use a different packing method
to the one described here. For details contact our
.
On units with a silver hub, a piece of transport foam (C) is fitted.
First very, very carefully pull the transport foam (C), if fitted, from
the laser assembly. Make sure you don’t apply force to the laser
whilst pulling the foam out. Do not touch the laser optics!
1. Throughout the instruction manual,
bold
print indicates the lettering that you will find
on the panels of your DVD32R and the remote
A
A
B
silver hub
C
GRR00876.03-DVD32R UM v3.7.qxd 8/28/02 2:14 PM Page 11
