TAG
Heuer Timin
Page 6 / 8
3. Select the correct COM Port
4. Browse and select the correct file (Rx/Tx)
5. Push START on the screen
6. Turn on the HL 675 (hold down for 5 seconds « ON »
The HL 675 will enter in a special setup mode
7. Until the file downloaded then, validate with « OK »
Hands on: Reinitialize your devices
If the systems are in a unknown mode, you can Initialise your system in the OEM
configuration (
Channel 1, Team A, Buzzer On, Baud Speed 9600bps, Mode Impulse
).
Push simultaneously
SET
and
TEST BATT
for 3 seconds.
All LED’s will flash and the system will beep until it is reinitialized.
4. Technical Specification
General
o
Impulse response precision:
+/- 1/10'000 sec
o
Transmitting
delay:
200ms
o
Frequency :
869 MHz
REC 70-03
o
Power
500 mW
o
Autonomy (at +68°F / 20°C)
24 hours (1 Impulse per min.)
8 hours (THbC data transm.)
1 data string each 4 sec.
o
Impedance :
50 Ohms
o
Antenna
1/4 Wavelength 2.5dBi
o
Impulse Input
Short-Circuit / Working contact
Respect the polarity
o
Impulse Output
4 separated outputs
Isolated by an opto-coupler
Manages up to 4 simultaneous inputs
o
Channel :
4 different channels (1,2,3,4)
o
TEAM function :
4 different codings (A,B,C,D)
o
Normal use temperature
between - 4°F (-20°C) and +131°F (+55°C)
o
Charging temperature
b32°F (0°C) and +86°F (+30°C)
o
Size (without antenna)
152 x 108 x 34 mm
o
Weight :
470g / radio
o
Power supply :
12 V DC / 800 mA min
Lithium-Polymer Battery
o
Type
12V Li-Pol 2000mAh
o
Charging current
800mA minimum (~ 5 hours)
Charger HL540-10
o
Primary
230V - 50Hz - 125mA
o
Secondary
12V – 1250 mA
Warranty :
One year after delivery of your purchase
The warranty is null and void under the following conditions:
-
if the battery is
out of order
