TAG
Heuer Timin
Page 3 / 8
1. Functions
1.1. The Transmitter :
1. IMPULSE
Input for timing Impulse (Start gate, photocell – working / closing contact). Respect
the polarities.
2. DATA
Male Sub-D 9: RS232 input for DATA transfer
2. POWER
To switch on the
receiver
(press for 3 seconds on
POWER
).
The green LED is on.
To switch off the
receiver
, hold down SET and press
POWER
.
4. SET
To program the
TEAM
(
A
,
B
,
C
,
D
) and to switch off the
receiver
.
Hold down
SET
during the changes.
5. TEAM
To check the programmed
TEAM
.
To change the code, hold down
SET
and press
TEAM
.
6. CHANNEL
To check the programmed
CHANNEL
.
To change the
CHANNEL
, hold down
SET
and press
CHANNEL
7. TEST
For testing the Impulse transmission only. The reception level will be displayed for
0.2 seconds on the receiver. You’ll also get an Impulse on the programmed
output.
8. TEST BATT
To check the state of the battery. Press
TEST
BATT
: The Battery level will be
displayed with the 4 LED’s for 2 seconds.
9. LED
LED control panel which shows the programmed
TEAM
or
CHANNEL
. Also shows
the transmitted Impulse.
10. LED
Shows the transmission mode :
IMPULSE
or
DATA
11. CHARGE
Charging status Leds.
The red led indicates that the battery is charging.
The charge is completed as soon as the green LED in on
.
1
2
3
8
7
4
5
6
9
11
10
