TAG
Heuer Timin
Page 4 / 8
1.2. The Receiver
1.
IMPULSE
Output for timing Impulse (Start gate, photocell – working / closing contact). Respect
the polarities.
2.
DATA
Female Sub-D 9 : RS232 Output
3.
POWER
To switch on the receiver (press for 3 seconds on
POWER
). The green LED is on.
To switch off the receiver, hold down
SET
and press
POWER
.
4.
SET
To program the
TEAM
(
A
,
B
,
C
,
D
) and to switch off the receiver. Hold down
SET
during the changes.
5.
TEAM
To check the programmed
TEAM
. The green LED corresponding to the code
A
,
B
,
C
or
D
is on. To change the code, hold down
SET
and press
TEAM
.
6. LED
LED control panel which shows the programmed
TEAM
or
CHANNEL
. Also shows the
Received Impulse.
7. LED
Shows the transmission mode :
IMPULSE
or
DATA
8. LED
LED control panel which shows the Receiving Level and/or
possible interferences
created by other radio signals.
9. BUZZER
To enable or disable the Buzzer
10.
TEST BATT
To check the Battery status. The Level will be displayed with the 4 LED’s for 4
seconds:
-
4 LED’s on = 80-100%
-
3 LED’s on = 60-80%
-
2 LED’s on = 40-60%
-
1 LED on = 20-40%
-
1 LED on = 0-20% power remaining
1
2
3
9
4
5
10
6
8
7