TGWxE1-2G PRI (ISDN) Trunk
Gateways Series for Aeonix User Configuration Manual
5-29
5.5.6 Security
Click the
Advanced > Security
tab to open this interface.
Figure 5-14 Security Configuration Interface
Table 5-15 Security Configuration Parameters
Name
Description
Telnet & SSH
service
Telnet
Select the check box to enable the Telnet service. The terminals can access the TGW through
Telnet.
SSH
Select the check box to enable the SSH service. The terminals can access the TGW through
SSH.
Password
The Telnet or SSH password consists of 6 to 20 bit case-sensitive characters (letters, digits, or
characters, such as !, @, #, $, %, and ^).
Confirm password
Re-enter the Telnet password.
Telnet port
The port used to access the TGW through Telnet. The value is 23 by default.
SSH port
The port used to access the TGW through SSH. The value is 22 by default.
Ping service
Ping
Block: the TGW does not respond to any Ping requests.
Unblock: the TGW responds to Ping requests.
Web service
HTTP port
The HTTP port used to access the TGW’s Web GUI. The value is 80 by default.
