TGWxE1-2G PRI (ISDN) Trunk
Gateways Series for Aeonix User Configuration Manual
1-4
Mark
Function
Status
Description
Flashing Green
System is operating normally
ALM
Alarm Indicator
Green
No alarms
Flashing Red
New alarms occurred
Red
Alarms exist
ETH
Interface state
indicator
Green On
The transmit speed is 1000M bit/s.
Green Off
The transmit speed is 10M bit/s or 100M bit/s.
Yellow On
The link has been established but no service traffic is transmitted.
Flashing Yellow
Service traffic is being transmitted on the link.
Yellow Off
The link is not established.
AUX
Interface state
indicator
Green On
The transmit speed is 1000M bit/s.
Green Off
The transmit speed is 10M bit/s or 100M bit/s.
Yellow On
The link has been established but no service traffic is transmitted.
Flashing Yellow
Service traffic is being transmitted on the link.
Yellow Off
The link is not established.
T1/E1
Interface state
indicator
Long Green
The connection works normally.
Blinking Red
A remote alarm has been generated.
Long Red
A local alarm has been generated.
Off
No connection is established.
Table 1-3 Pinouts of Ethernet Ports
RJ45 Pin-out
1
2
3
6
Description
TX+
TX-
RX+
RX-
Table 1-4 Pinouts of T1/E1 Module
RJ45 Pin-out
1
2
3
4
5
6
7
8
Description
RX Ring
RX Tip
NC
TX Ring
TX Tip
NC
NC
NC
Figure 1-2 Back Panel
Table 1-5 Description of Back Panel
Item
Description
①
AC power socket, 100-240VAC voltage input
②
Ground pole
