Basic Call Features
35
Enter the desired number using the keypad.
Press , , or tap the Send soft key.
Note
The T48G/S IP phone can handle multiple calls at a time. However, only one active call
(the call that has audio associated with it) can be in progress at any given time. The
T48G/S IP phone can handle a maximum of 6 calls at one time.
To place multiple calls:
You can have more than one call on your T48G/S IP phone. To place a new call during an
active call, do one of the following:
-
Tap the line key. The active call is placed on hold.
Enter the desired number using the keypad or the on-screen keypad.
Press , , or tap the Send soft key.
-
Press or tap the Hold soft key to place the original call on hold.
Tap the New Call soft key.
Enter the desired number using the keypad or the on-screen keypad.
Press , , or tap the Send soft key.
You can tap the desired call, and then tap the Resume soft key to retrieve it.
Note
Answering Calls
When you are not in another call, you can answer a call in one of three ways:
Using the handset
Using the speakerphone
Using the headset
Note
Answering When Not in Another Call
You can reject incoming calls by pressing the X key or tapping the Reject soft key to stop
the phone from playing ring tone. You can also activate the Do Not Disturb mode to
reject the incoming calls without ringing on your phone. For more information, refer to
You can forward incoming calls to someone else by tapping the Forward soft key. For
more information, refer to
Error! Reference source not found.
on page
Error! Bookmark
t d fi d
To permanently use the headset mode, refer to
Error! Reference source not found.
on
If multiple accounts are registered on the phone, you can first tap the desired line key in
the idle screen or tap the desired line from the status bar in dialing screen, and then you
can use the selected account to place a call.
