Customizing Your Phone
23
System Customizations
Headset Use
If you want to use a wired headset, physically connect your headset and activate the
headset mode for use. For more information on physically connecting a headset, refer
to
If you want to use a wireless headset, insert the Bluetooth USB dongle BT40 into the USB
port on the back of the phone. For more information on using a Bluetooth headset, refer
to
This section provides an introduction to wired headset use.
Note
Headset Mode Activation/Deactivation
To activate the headset mode:
1.
Press on the phone.
The HEADSET key LED illuminates solid green, and the icon appears on the
status bar of the touch screen when the headset mode is activated. When you tap
the line key or the Answer soft key to answer an incoming call, the call is connected
to your headset automatically. For more information on using the headset to answer
a call, refer to
on page
With the handset on-hook, enter the desired number and tap the Send soft key, the
phone will then place a call using the headset automatically. For more information
on using the headset to place a call, refer to
To deactivate the headset mode:
1.
Press again on the phone.
The HEADSET key LED goes out, and the icon disappears from the touch screen
when the headset mode is deactivated.
Bluetooth Headset
The T48G/S IP phone supports Bluetooth. Bluetooth enables low-bandwidth wireless
connections within a range of 10 meters (32 feet). The best performance is in the 1 to 2
meter (3 to 6 feet) range.
You can activate/deactivate the Bluetooth mode, and then pair and connect the
Bluetooth headset with your phone. You can pair up to 30 Bluetooth headsets with your
If both a Bluetooth headset and a wired headset are connected, only the Bluetooth
headset can be used.
