Caller Blocking
99
T207S, T208S, T207S/NP and T208S/BL User Guide
Caller Blocking
[Config]
>Blocking List
The T207S/NP, T208S/BL, T207S and T208S allows you to block incoming calls from specified Caller IDs. A
maximum of 10 Caller ID numbers indexed by access numbers 0 to 9, can be defined as Blocked. The blocked keyset
caller does not hear any tone and the call is immediately disconnected. The blocked SIP caller hears a busy tone.
The following message is displayed on the caller’s T207S/NP, T208S/BL, T207S and T208S phone:
The following message is displayed on the caller’s keyset (FlexSet, DKT, T207M, T208M, T207M/NP or T208M/BL):
To add or edit a Blocked dial number:
1. Press
[Config]
.
2. Use the up/down navigator keys to select
16.Blocking List
and press
OK
.
3. The
Blocking List [0-9]
: empty screen is displayed.
4. Press the up/down navigator keys to view the entries. Each entry is marked with a code from
[0]
to
[9]
.
Note: You can, alternatively, enter the access code (0-9) from the dial pad followed by
OK
to view the entry.
5. After selecting an access code, press
[Edit]
in order to enter the dial number.
• Enter numbers from the dial pad.
• Use
[Backsp]
to delete
486 Busy Here
ONHOOK BY
username
CAUSE # 486
