Tadiran Telecom T207M/NP User Manual Download

Page: 247 / 300

Attendant Features

235

T207M, T208M, T207M/NP, T208M/BL User Guide

Trunk Setup Features

♦

[BOut]

Busy Out

is used to block any trunk for both incoming and outgoing calls. (This feature may be used to block

faulty trunks until the CO service is restored.) When

ASSIGN

appears in the display the trunk line is blocked.

DEASSIGN

means the trunk line is in use by the system.

♦

[Drop]

Drop No Dial

is used to program an outgoing trunk to be dropped when a caller does not dial the first digit

within a system-wide time limit. The trunk is then made available to other users.

♦

[HotI]

Hot Trunk Immediate

is used to program an outgoing trunk so that the trunk automatically and immediately

connects to the system.

♦

[HotD]

Hot Trunk Delay

is used to program an outgoing trunk to automatically connect to the system, after first

digit time-out, when no dialing has taken place.

♦

[IncO]

Incoming Only

is used to reserve any trunk for incoming calls only, thereby preventing outgoing calls on

that trunk.

♦

[OutO]

Outgoing Only

is used to reserve any trunk for outgoing calls only. All incoming calls on that trunk will

continue ringing with no answer and will not be transferred to any destination.

[Rsvd]

Reserved To

is used to reserve any trunk and trunk group to a specific station or boss group. The reservation

will prevent any other stations or boss group stations from making outgoing calls on these trunks.

Summary of Contents for T207M/NP













































































































































































































































































































Search results

Summary of Contents for T207M/NP

Reviews:

Related manuals for T207M/NP

Brands by name

Popular brands

Tadiran Telecom T207M/NP, User Manual

Search results

Summary of Contents for T207M/NP

Reviews:

Related manuals for T207M/NP

Brands by name

Popular brands