background image

Station Telephony Features

106

T207M, T208M, T207M/NP, T208M/BL User Guide

ELA Groups: Using

ELA Groups: Using

Calling an ELA Group:

Dial the ELA Group number.

NOTE! 

The line key LED of the ELA main station as well as all group members flashes and may also ring 
(see 

ELA: Defining the ELA Line Keys Ring State on page 104

).

Making calls:

 1. Press a free ELA 

LINE

 key.

 2. Dial the required number.

NOTE! 

The line key LED of the ELA main station as well as all group members changes from off to 
steady on for the duration of the call.

Receiving calls:

When the line flashes (note that the telephone may also ring - see 

page 104

):

 1. Any ELA member may press the flashing 

LINE

 key or, if phone rings, lift the handset.

 2. Answer the call.

NOTE! 

The line key LED of all group members now changes from flashing to steady on for the duration of 
the call.

Putting a call on hold:

Press a programmed HOLD key at your station.

NOTE! 

If Exclusive Hold is defined at your station, then pressing Hold causes an exclusive hold state 
such that the call can only be retrieved from your station. See 

ELA Groups: Exclusive Hold on 

page 109

.

Summary of Contents for T207M/NP













































































































































































































































































































Reviews: