Tadiran Telecom FlexSet 280, Manual

Page: 50 / 132

3-8
Coral Terminal Equipment
W
all M
ount/D
esk El
evati
on
3
A. Unpacking the Shipping Container
The FlexSet Wall Mount and Desktop Elevation kit includes the following items:
„
One (1) plastic wall mount bracket
„
Cat.No. 7244-8131540 pearl white
„
Cat.No. 7244-8131548 dark gray
„
Three (3) tap screws (
used when wall mounting)
„
Three (3) wall plugs (
used when wall mounting)
„
Two (2) rubber bumpers (
used when wall mounting)
B. Elevating the FlexSet on the Desktop
The Wall Mount bracket may be used to elevate the FlexSet on a desktop in order to
lower the viewing angle of the keyboard, instead of being used to mount the phone on
a wall.
Figure 3-9 Desktop
Elevation Rubber
Bumpers
1. Put the handset and line cords into the grooves located at the side and top of the
phone’s back, respectively.
2. Hold both the telephone and the desktop elevation bracket with the thin ends
downward.
3. Place the bracket’s legs, located on the thin edge of the bracket, into the matching
narrow slots on the bottom of the phone towards the thin edge, as shown in
Figure
3-10
and
Figure 3-11
.
2 Desk Elevation Bracket (28
degree
)
Rubber
Feet