Tadiran Telecom FlexSet 280, Manual, Page: 107 / 132

Coral Terminal Equipment
9-7
Fl
ex
APDL Instal
lati
on
9
Consult the
Program Interface Reference Manual
for instructions on the database
programming required when installing a FlexAPDL. The following are the parameters
which may be set:
General System Parameters Applied to all Keysets in the System
System Sizes _______________________________________________ (Route: SIZ)
The system database allocates resources to manage the operation of 8/16/24/SFT,
8/16SFTipx, 8/16SFTsl and 8F8Ssl peripheral cards based on the number of FlexSets
that these cards are able to support. An 8 port card supports up to 8 keysets, a 16 port
card supports up to 16 keysets and a 24SFT card supports up to 24 keysets.
Verify that
System Sizes allocates sufficient resources to accommodate the total
number of FlexSets provided by all cards installed in the system. If insufficient
resources have been allocated in
Sizes , the entry must be increased or the keysets will
not initialize.
KEYSETS_3
Set this parameter to accommodate the appropriate number of
FlexSet 80S/80P/280/280D/280D-Z/280D-HS/280S/281S/FlexAPDL
(and EKT3XX, VDK321, DKT23XX, FKT, GKT and FlexAPDL).
.
Parameters applied to each FlexAPDL
The following parameters of the system database are used to assign information
specific to each FlexAPDL on a per port basis.
Numbering Plan ___________________________________________ (Route: NPL)
In the pattern numbering plan, each FlexAPDL is assigned a keyset dial number. This
number can be modified by choosing ADD or REMOVE and assigning the dial
number to a specific circuit or feature.
5 Database Programming
Modification of the System Sizes initializes the entire system database, and requires the
re-entry of all database information after Sizes have been modified.