Tadiran Telecom Coral IPx 500, Quick Installation Manual

Page: 37 / 86

General System Description and Installation
1-27
General System De
script
ion and Installation
1
1
The Coral IPx 500 system installation includes the following stages:
„
System unpacking. See page 1-29, Unpacking the Shipping Container .
„
Preparations for mounting the cage onto the wall or rack. See
page 1-34, Attaching
the Wall-Mounted Bracket onto the Wall or page 1-35, Mounting the Cage onto the
Wall-Mounting Bracket
.
„
Mounting the cage. See page 1-31, Wall-Mounted Configurations .
„
System grounding. See
page 1-40, Grounding
.
„
System power wiring. See page 1-40, Grounding or page 1-45, Power Connections for
AC Systems
.
The Coral IPx 500 system should be installed in restricted access areas (dedicated
equipment rooms, equipment closets, or the like) in accordance with articles 110-16,
110-17, and 110-18 of the national electric code, ANSI / NFPA 70.
Access to the system should be limited and controlled to prevent unauthorized
tampering. The system uses hazardous working voltages and extremely high short
circuit currents, and the area must be protected against damage by, and injury to,
unqualified personnel.
3 System Installation
General Hazard. Installation and maintenance activities carried out by unqualified
personel could lead to death, serious injury, or damage to equipment. Only qualified
service technicians certified by the manufacturer may install and maintain the Coral IPx
500.
There is the danger of explosion if a lithium battery in any card is replaced incorrectly. If
for any reason, during the installation or maintenance of the Coral IPx 500, you need to
replace a lithium battery, replace the battery only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.