T200M Series Installation Manual - Aeonix
Installing the Phone
13
Powering th
e P
ho
ne
3
................................................................................................................
Powering the Phone
1
Do one of the following:
Connect the AC power adapter to the power outlet. See
Wall Power Adapter (Type C), page 44
Connect the LAN cable to the LAN outlet. See
802.3AF” - Type A & B, page 37
2
Check the phone connectivity. See
Checking the Phone Connectivity, page 45
.
................................................................................................................
Registering the Phone via Aeonix
1
Before configuring its parameters, the phone must be registered in Aeonix. In
Aeonix, add the phone. See
Defining a T207/T208 Phone in Aeonix, page 47
.
2
Assign a user ID to the endpoint.
3
Define the Endpoint Type as a Tadiran MGCP phone
4
Define the phone ID and parameter values.
5
Registering the Parameters in the Phone, page 14
An AC power adapter supplying 5VDC / 2A maximum is required for all NP phones. It is
not supplied with the phone and must be ordered from the manufacturer, only.
The use of any other power adapter will void the warranty.
Summary of Contents for Aeonix T200M Series
