12
Installing the Phone
T200M Series Installation Manual - Aeonix
Unpacking the Phone
3
................................................................................................................
Unpacking the Phone
1
Unpack the phone. See
Unpacking and Assembling the Phone, page 19
2
Verify that all components have been supplied.
3
Verify that none of the components are damaged.
4
If components are damaged and/or missing, contact your supplier. Otherwise
proceed to the next procedure.
................................................................................................................
Connecting the Phone
1
Connect a LAN cable to the phone. See
Connecting the Phone to the LAN/PC,
2
Connect to the power source as follows:
Connect the AC power supply adapter.
For phones that include a PoE/Adapter selection switch, turn the Power
Source switch to “Adapter”. Turn the Power Source switch to “PoE”, if
powered from the LAN. See
Setting the Power over Ethernet (PoE) Switch
(T207M, T208M, T208M/BL), page 23
3
Connect the PC port to your PC. See
Connecting the Phone to the LAN/PC,
4
Do one of the following:
Position the phone on desk. See
Positioning the Phone on your Desk, page 29
.
Mount the phone on wall. See
Mounting the Phone onto the Wall, page 30
.
5
If the phone is to be connected directly to other T207/T208 phones, see
.
6
Install the TEM Expansion Unit. See
7
Connect the handset to the phone. See
Installing the Handset, page 22
.
8
Connect the headset to the phone. See
Installing the Headset, page 22
.
Summary of Contents for Aeonix T200M Series
