Tadiran Telecom Aeonix T200M Series, Installation Manual

Page: 43 / 98

T200M Series Installation Manual - Aeonix TEM Expansion Unit Description 35
Installing the TEM
5
................................................................................................................

Installing the TEM
1
Remove the power and the LAN cords from the phone, if connected.
2
Remove the protective rubber cover from the two sleeves on the right side of
the phone.
3
Insert the shafts on the TEM into the sleeves affixed to the right side of the
phone. See Figure 19 . A slight resistance will be felt as the multi-pin
connectors of the TEM unit and the phone engage.
Figure 19 TEM
Installation
4
Fasten at least two of the four screws provided into the mating holes of the
TEM unit-phone assembly (on the underside of the phone). See Figure 20 .
For a description on how to configure the TEM buttons for MGCP phones,
see the
T200M Series
Telephone User Guide or theAeonix Configuration
Guide for End Users.
Figure 20 Fastening the
TEM Unit to the Phone