Tadano RCS-FT1, Manual

Page: 12 / 28

M037970E
Radio-control
12
Radio-control
4
. Confirm that the mode indicator lamp of the
control unit displays “L0”.
The lamp displays “L0” after displaying “88.”
(All light up).
5
. Press the power switch to turn on the power of
the transmitter. The power LED of the transmitter
lights up.
If the power switch is pressed while other
switches or the speed control lever is under
operation, the switch failure detection function
works to indicate the error state. (Refer to the
chapter of “Safety Functions of Radio-control
System”). Do not touch any other switch or
lever than the power switch.
6
. Confirm that the mode indicator lamp of the
control unit has changed from “L0” to the
radio-control mode “L1”.
7
. Confirm that the speaker switch is turned “ON”.
No alarm sounds if the speaker switch is
“OFF”.
M22336E
Mode indicator lamp
Power switch
M22665E
Power LED
M22339E
Mode indicator lamp
SPEAKER
SPEAKER
ON
OFF
M22662E
Speaker
switch
SPEAKER
SPEAKER
ON
OFF
Radio
Manual