M038000E
Measures for Emergency Case
22
Measures for Emergency Case
2. If the Radio-control is not Possible
1.
The unloading solenoid of the radio-control
valve should be fastened so that the crane
can be manually stowed.
(1) Remove the cap nut.
(2) Loosen the lock nut and lightly tighten the
screw inside until it cannot be turned any
longer.
Fastening the screw too tight may cause
operation failures. Make sure to lightly
tighten the screw.
2.
After manually stowing the crane, have the
crane and radio-control system
inspected/repaired at the nearest TADANO
distributor or dealer.
This is a measure to stow the crane in an emergency case. Do not
make any crane operation.
Warning
M22377E
Cap nut
Lock nut
Screw
Summary of Contents for RCS-FT1
Page 26: ...26 MEMO...
Page 28: ......
