Tadano GT-600EX, Service Manual

Page: 19 / 124

12
WY02-1501E
Y-2 Y-2
Adjusting Pressure (Hydraulic Pressure)
4. Outrigger
[NOTICE]
 Oil temperature: 50 ± 5 °C (113 - 131°F) (Hydraulic oil: TADANO Hydraulic Oil LL)
 Shift the control lever or switch while the engine is idling, then increase engine speed.
Set pressure
Tem
（
Mark
）
MPa kgf/cm
2
psi
Engine
speed
(min
-1
)
Check procedure
Outrigger
(G)
20.6 ± 0.5 210 ± 5 2990 ± 70 1250
1. Connect a pressure gauge to the
pressure check port.
2. Turn the PTO switch ON.
3. Extend each the jack cylinder at its full
stroke.
(Engine speed raises automatically to
1250 min
-1
.)
4. In this state, check the pressure by the
pressure gauge.