Tadano GT-550E-2, Operation And Maintenance Manual

Page: 5 / 100

Correctly Position the Seat
Incorrect positioning of the operator
’
s seat can re-
sult in mistakes or fatigue, possibly leading to an
accident.
Before operating the machine, correctly position the
seat so that the pedals and levers can be manipulat-
ed correctly.
Maintain Good Visibility
Fouled window panels, lights or rearview mirrors
can limit the operator
’
s visibility, impairing safe op-
eration. Always keep the window panels and light
lenses clean.
Position mirrors correctly as required by job condi-
tions.
Perform Pre-Operation Inspection
Neglecting routine inspections and maintenance
can shorten service life of the machine or even re-
sult in an accident.
Before starting operation (and before taking over a
shift), perform the pre-operation inspection on the
carrier and the upper structure to ensure that the
machine is in proper condition and free from any
problems.
Should any problem be found, report it to the re-
sponsible person, remedy it, and only then start
operation.
Do Not Operate a Machine Being
Inspected or Serviced
Operating the machine while it is undergoing in-
spection or maintenance work can cause damage or
an accident.
Post a “ DO NOT OPERATE ” sign on the operator ’ s
cab door or any control lever. Do not attempt to op-
erate the machine until the sign is removed by
maintenance personnel.
Check the Position of Controls before
Starting the Engine
If any control lever is in a position other than
“
neu-
tral
”
, the machine may initiate some mechanical or
hydraulic function as soon as the engine is turned
over. This situation is very dangerous. Start the en-
gine only when completely sure that all controls are
in the proper neutral or inactive position.
Make Sure Work Area Is Safe before
Starting the Engine
Starting the engine without performing a thorough
safety check of the work area may cause damage to
the machine or injury or death.
Make sure there are no personnel or obstacles un-
derneath or around the machine.
Before starting the engine, sound the horn to warn
any nearby personnel.
T019605E
A-4
Safety Rules Safety Rules
T01938E
WARNING
DO NOT OPERATE