Y-9
Y-9
Operation Check (Traveling Device)
49
WY05-4520E
3. Steering mode change
4. Overshift prevention
[1 km/h = 0.6214 MPH]
[NOTICE]
Jack up the vehicle and shift to 4WD High position.
Perform the operations below and check the shift
position with the combination meter.
1. Move the shift lever to “D” and increase speed to
30 km/h or more. Check that transmission shifts
to 4th gear (display: D).
2. Gradually reduce speed. Maintain a speed of 30
km/h. Move the shift lever to “2”. Check that
transmission does not downshift (display: D).
3. Gradually reduce speed. Check that transmission
downshifts to 3rd gear when the speed is 28 km/h
(display: 3).
4. Maintain the shift lever to “2”. Reduce speed to 22
km/h. Check that transmission does not downshift
(display: 3).
5. Gradually reduce speed. Check that transmission
downshifts to 2nd gear at 18 km/h (display: 2).
6. Maintain a speed of 11 km/h. Move the shift lever
to “1”. Check that transmission does not
downshift (display: 2).
7. Gradually reduce speed. Check that transmission
downshifts to 1st gear at 9 km/h (display: 1).
Meter speed Combination meter
display
1. 30 km/h
D
2. 30 km/h
D
3. 28 km/h
3
4. 22 km/h
3
5. 18 km/h
2
6. 11 km/h
2
7.
9 km/h
1
Change the steering mode switch to 4-wheel or crab steering.
Turn the steering wheel, and check the steering.
Check that the indicator in the right bottom of the instrument panel
is ON, except when rear wheels are out of straight-ahead
condition.
Make the rear wheels in the straight-ahead condition.
Check that the indicator is OFF.
Push the 2-wheel steering mode selector switch.
Summary of Contents for GR-500EXL-3
Page 1: ......
Page 8: ...7 WA04 4610E 6 Group index System Diagrams Data Adjustment and Checks Y Z Y Z...
Page 102: ...Z 7 Z 7 Hydraulic Parts Location Diagram Lower 31 WZ07 3950E 2 Steering 2 346 418 02000...
Page 108: ...37 WZ08 0590E Z 9 Z 9 Pneumatic Parts Location Diagram 3 Control parts lower 4 349 232 60000...
