TAD DA1000, Owner'S Manual

Page: 14 / 128

14
Connecting up
CAUTION
 Do not turn on the power switch to the TAD-DA1000 or the other components until all connections have been completed.

When connecting components or changing connections, always set the power switch to OFF and disconnect the power
cord from its AC outlet. When making connections, connect the power cord last.
•
Although the power cord to the TAD-DA1000 is re m ovable, do not atte m pt to use a power cord
other than the supplied cord.
1. Connect other co m ponents.
2. Connect the supplied power cord to the TAD-DA1000’s AC IN connector.
3. Connect the power cord to a standard electrical outlet.
USB XLR COAXIAL OPT
DIGITAL INPUT
XLR COAXIAL
12 V
TRIGGER
IN
D4 D1 D2 D3
BALANCED UNBALANCED
L L R R
AC IN
2
1
3
1: Ground
2: Hot
3: Cold
BALANCED
output connector
(XLR-3-31 equivalent)
R L
1. Turn on power to both the unit
and computer.
2. Switch the unit’s input to U1.
3. Using a USB cable, connect
the computer and unit; when
this is done the proper driver
will be automatically installed
(page 16).
Component with digital output connector
Component with digital input connector
Computer with USB port
Component
with 12 V trigger output connector
Pre-Amplifier with balanced input connectors Pre-Amplifier with unbalanced input connectors
Power cord
(supplied)
To AC
Power outlet