TAD DA1000, Owner'S Manual

Page: 10 / 128

10
Main unit front panel
1 2
3
4 9 6 5 10 7 8 3
NAMES OF PARTS AND THEIR FUNCTIONS
1  Power button
Use to set power to ON
/
standby mode.
2 Power indicator
Lights to indicate the unit
’
s power status.
Lighted yellow : ON (unit can be operated).
Off
:
Standby (indicates power cord is connected and unit
is in standby mode).
3 INPUT button
Use to select the input source.
4 VOL (−/+) buttons
Use to ad j ust sound volume at the unit ’ s line
output connectors (ANALOG OUTPUT
:
BALANCED
/
UNBALANCED).
Note
 These buttons are deactivated in their default factory-
shipped status, and output is fixed at its maximum
value. To activate these buttons, hold the VOL (−)
button depressed for several seconds.
5 Display
The display provides graphic information about the TAD-
DA1000
’
s many operations and functions.
6 Re m ote control sensor
Point remote control unit at this sensor to operate.
Effective distance is within about 7 meters ( 23 ft.).
7 DISP button
Use to change or hide information items shown in the
display.
8 MUTE button
Press to temporarily turn off playback sound.
9 Headphones volu m e (−/+) buttons
Use to ad
j
ust the headphone sound volume.
10 Headphones jack
Insert headphones
j
ack here.
CAUTION
 When using the volume function and connecting directly to a power amplifier (without using a pre-amplifier), be sure
to make the connection only after setting the volume to “0” (zero) . If the connection is made with the volume set to its
default value (maximum), the speakers could be damaged.
 When going on vacation, or otherwise leaving the unit unused for an extended period of time, the power plug should
be disconnected from its power outlet.