Tacony OB28240, User Manual

Page: 2 / 14

1 02-19
IMPORTANT
BEFORE USE READ THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE
INTRODUCTION
The following instructions contain important information about the
machine and safety advice for the operator. Equipment must be
operated, serviced and maintained in accordance with the
manufacturer’s instructions. If in doubt contact the supplier of
your machine.
Read all instructions before using the
machine
PRODUCT INFORMATION
These commercial floor treatment machines are designed for the
scrubbing and polishing of hard floors and/or shampooing of
carpets in indoor areas. This machine is for indoor use only. The
machine is intended for commercial use, for example in hotels,
schools, hospitals, factories, shops, offices, rental businesses and
other than normal housekeeping purposes.
TECHNICAL SPECIFICATIONS
Model Orbis Compact
Product Code OB28240
Voltage AC (~)/ Frequency V/Hz 230/50
Motor Power W 550
Productivity Rate m²/h 308
Pad / brush speed rpm 240
Pad / brush pressure g/cm² 35
Pad / brush diameter cm 28
Sound pressure level dB(A) 62
Dimensions (L x W x H) with
handle
cm 54 x 32 x 115
Weight kg 22
Cable length m 15
Warranty
2 years subject to
conditions

Handle vibration does not exceed 2.5 m/s² when operating on
a smooth hard surface.

Noise levels measured at a distance of 1 metre from machine
and 1.6 metres above floor, when washing a hard floor.
Measurements recorded using a hand held meter.

Above dimensions are approx. Since the company’s policy is
to continuously improve the product, there could be changes
without prior notice.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
(WEEE)
Do not dispose of this device with unsorted waste.
Improper disposal may be harmful to the
environment and human health. Please refer to your
local waste authority for information on return and
collection systems in your area.
IMPORTANT SAFETY ADVICE
The safety information described in this manual provides basic
precautions and supplements standards in force in the country
where the machine is used.
This symbol warns the operator of hazards and unsafe
practices which could result in severe personal injury
or death.
WARNING – to reduce the risk of injury,
electric shock or fire.
1. This machine must only be used for the manufacturer’s
approved application as described in this manual.
2. The machine must be unpacked and assembled in accordance
with these instructions before connecting to the electrical
supply.
3. Only genuine accessories and spare parts provided with the
machine or those approved by the manufacturer should be
used. The use of other accessories may impair the safety of
the machine. All repairs must be performed by a qualified
service agent.
4. DO NOT modify the machine from its original design.
5. Operators must be fully trained in the use of the machine in
accordance with these instructions, able to perform regular
user maintenance and the correct selection of accessories.
6. Operators should be physically capable to manoeuvre,
transport and operate the machines.
7. Operators should be able to recognise unusual operation of
the machine and report any problems.
8. This machine is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of
the machine by a person responsible for their safety.
9. Keep children and unauthorised persons away from the
machine when in use.
DO NOT use as a toy.
10. DO NOT use if it has been damaged, left outdoors or
dropped in water.
11. DO NOT use where hazardous dust is present.
EC Declaration of Conformity
Machine Type: Rotary Floor Cleaning Machine
Model: OB28240…
This machine is in conformity with the following EU directives:

Machinery Directive 2006/42/EC

The EMC Directive 2014/30/EU
Applied harmonised standards:
EN60335-1, EN60335-2-67, EN55014-1, EN55014-2, EN62233,
EN61000-3-2, EN61000-3-3
Truvox International Limited
Unit C (East), Hamilton Business Park,
Manaton Way, Botley Road,
Hedge End, Southampton,
SO30 2JR, UK
Malcolm Eneas
Operations Manager
Southampton, 21/08/2018