TACOFLOW3 MAX / MAX PRO
MKTG-TRA-MAN-E9150400-10/2019-ENG
Instructions for installation and use
31
12.2
START-UP
DANGER
BEFORE STARTING THE CIRCULATOR, IT IS MANDATORY TO READ AND BE CERTAIN TO HAVE UNDERSTOOD ALL THE PARTS
OF THIS MANUAL.
WARNING
IT IS MANDATORY TO PERFORM THE CHECKS OF THE
BEFORE EVERY START-UP OF THE CIRCULATOR.
1)
Energise the circulator by turning the main switch (installed by the Client) to
Pos. I
or by inserting the plug into a
suitable electrical socket
2)
Check that the LED lights up on the circulator
12.2.1 VENTING THE SYSTEM
At start-up, the circulator can be noisy due to air in the system.
Air in the system is indicated by the white LED turning on and flashing (in the
MAX PRO Mod.
the operating status LED
turns white)
; vent the system.
WARNING
IT IS MANDATORY TO CARRY OUT VENTING OPERATIONS USING MANDATORY PPE. THERE ARE RESIDUAL RISKS 1 AND 2
.
1)
Open the air vent valve in the hydraulic system above the circulator
2)
Set the circulator to the Variable Power Curve function with MAX value. (100%)
3)
Let the circulator run for a short time
4)
After venting the system, the LED stops flashing and changes colour, set the circulator to the desired function
