TACOFLOW3 MAX / MAX PRO
24
Instructions for installation and use
MKTG-TRA-MAN-E9150400-10/2019-ENG
9.2
UNPACKING
Proceed as follows to unpack:
1)
Open the packaging and remove the circulator
2)
Check the packaging contents
INFORMATION
IF COMPONENTS OR ACCESSORIES ARE MISSING, CONTACT THE MANUFACTURER
.
IF THE CIRCULATOR COMPONENTS SHOW DAMAGE OR ANOMALIES, CONTACT THE MANUFACTURER AND DO NOT USE IT.
ATTENTION
IT IS MANDATORY TO DISPOSE OF THE PACKAGING ACCORDING TO THE VARIOUS TYPES OF MATERIAL IN STRICT COMPLIANCE
WITH THE LAWS IN FORCE IN THE COUNTRY OF USE.
DANGER
IT IS FORBIDDEN TO HANDLE THE CIRCULATOR BY GRASPING THE HEAT SINK
(FIG. 6 - REF. 1)
: THE ELECTRONIC BOARD CAN
BE DAMAGED.
FIG. 6
PLAN
(It is forbidden to handle the circulator by grasping the heat sink)
10
STORAGE
If the circulator must be left unused for a long time, you must:
1)
Check that the circulator is in the
safety state
2)
Grease the mechanical parts
3)
Clean the circulator
4)
Protect the circulator with a sheet or other protective measure to prevent the accumulation of dust
ATTENTION
IT IS FORBIDDEN TO STORE THE CIRCULATOR LEAVING IT EXPOSED TO BAD WEATHER, SUNLIGHT AND DUST.
