TACOFLOW3 MAX / MAX PRO
MKTG-TRA-MAN-E9150400-10/2019-ENG
Instructions for installation and use
29
Proceed as follows to connect the circulator to the power source:
1)
Use a cable
(FIG. 10 - Ref. 1)
with the features indicated in
2)
Connect the blue wire (neutral) to terminal N
(FIG. 10 - Ref. 2)
3)
Connect the black or brown wire (phase) to terminal L
(FIG. 10 - Ref. 3)
4)
Connect the yellow/green wire (earth) to terminal G
5)
Connect the terminal board in the appropriate seat
6)
Tighten the cable gland manually (MAX tightening torque 2 Nm)
7)
Remove the protective label
8)
Insert the plug&play connector on the pump until both hooks click
9)
Enable the voltage and check the connection by the LED
(FIG. 10 - Ref. 5)
on the
MAX mod.
and the display
10 - Ref. 6)
on the
MAX PRO mod.
turning on
FIG. 10
(Connection to the power source)
