TACOFLOW3 MAX / MAX PRO
MKTG-TRA-MAN-E9150400-10/2019-ENG
Instructions for installation and use
3
INTRODUCTION
Dear Client,
We would like to firstly thank you for trusting us with your new purchase of the
“Circulator - TacoFlow3 Series”
.
We are confident that our product will meet your expectations, thanks to the reliability achieved with our constant
attention to the innovative processes and the technical and commercial transformations of the markets.
We are also certain to be able to fulfil all your future operating requirements, and we therefore are happy to remain at
your disposal to offer you all our experience and knowledge for the best solution to all your questions.
WARNING
IT IS FORBIDDEN TO USE THE CIRCULATOR BEFORE IT IS COMMISSIONED AND THE TEST CERTIFICATE IS SIGNED.
1
MANUFACTURER
Name
TACO ITALIA SRL
Address
Via G. Galilei, 89-91 - 36066 Sandrigo (VI) Italy
Tel.
+39 0444 666800
Fax
+39 0444 666801
Website
www.tacoitalia.com
TAB. 1
(Manufacturer)
1.1
SERVICE CENTRES
Contact the Manufacturer to be directed toward the relevant Service Centre.
1.2
REQUESTING TECHNICAL SUPPORT
Requests for intervention must be addressed directly to the Manufacturer, specifying
:
1)
The designation of the circulator
2)
The circulator model
3)
The serial number (see CE marking or EU declaration of conformity)
4)
The year of construction
5)
Type of problem encountered
