TACOFLOW3 MAX / MAX PRO
30
Instructions for installation and use
MKTG-TRA-MAN-E9150400-10/2019-ENG
12
USING THE CIRCULATOR
12.1
CHECKS AND OPERATIONS BEFORE START-UP
DANGER
BEFORE USING THE CIRCULATOR, IT IS MANDATORY FOR THE AUTHORISED OPERATORS TO READ AND BE CERTAIN TO HAVE
UNDERSTOOD ALL THE PARTS OF THIS MANUAL.
WARNING
IT IS MANDATORY TO PERFORM THE FOLLOWING CHECKS AND OPERATIONS BEFORE STARTING THE CIRCULATOR.
Ref.
Checks and operations
1
Make sure there are no unauthorised people near the circulator
2
Make sure that all parts of the circulator are intact
3
Make sure the guards and protective devices are intact and function correctly
4
Check that the shut-off valves are open
5
Check that the system is pressurised
6
Check the condition of the power cable
7
Obtain the mandatory personal protective equipment (PPE)
8
Make sure you have understood the correct installation procedure
TAB. 18
(Checks and operations before start-up)
