4.
Remove the cover (9).
5.
Blow out the device interior with low-pressure com- pressed air.
6.
Attach the cover again (9).
7.
Fasten the screw (35).
8.
Insert the screw (36) again and tighten it.
9.
Close the storage box (10).
12.2 Servicing
12.2.1 Bearings (fig. 1/pos. 11)
Lubricate the bearing points (10) of the deflection rollers after approx. 25-30 operating hours at the
latest using high-quality machine grease.
12.2.2 Carbon brushes
In case of excessive sparking, have the carbon brushes checked only by a qualified electrician.
IMPORTANT
The carbon brushes should not be replaced by anyone but a qualified electrician.
12.2.3 Mains cable
If the mains cable is pulled out, cut, or damaged in some other form, then it should be replaced
immediately.
12.2.4 Replacing the fine-wire fuse (fig. 16)
If the fine-wire fuse (37) is defective, it must be replaced with a fine-wire fuse of the same type.
WARNING
Do not bypass the fine-wire fuse (37)! Do not use fuses of any other type! This can lead to damage to
the device.
12.3 Service information
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Wear parts*: Carbon brushes, saw blade, table inlay
* Not necessarily included in the scope of delivery!
12.4 Ordering replacement parts
The following information must be provided on all orders for spare parts:
Model/type of the equipment
Article number of the equipment
13. Storage
Store the equipment and accessories out of children’s reach in a dark and dry place at above
freezing temperature. The ideal storage temperature is between 5 and 30 °C. Store the electric tool
in its original packaging.
14. Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw
materials in this packaging can be reused or recycled.
The equipment and its accessories are made of various types of material, such as metal and plastic.
Defective components must be disposed of as special waste. Ask your dealer or your local council.
