![background image](http://html1.mh-extra.com/html/tac/xenta-511/xenta-511_handbook_3156300014.webp)
2 TAC Xenta 511
TAC Xenta® 511 and 911 Handbook
TAC AB, Feb 2005
0-004-7870-2 (EN)
2.3.1
Information from the Network Administrator
Determine whether
fixed IP address
or
DHCP
(Dynamic Host Config-
uration Protocol: IP address is assigned by the system) will be used.
Complete this “Setting List for Configuration”.
•
IP address (If fixed; e.g. 172.20.4.21):
•
Subnet mask (If fixed; e.g. 255.255.0.0):
•
Default Gateway (e.g. 172.20.2.100):
•
DNS (e.g. 192.165.248.22):
•
Web site name:
•
Domain name:
•
Host name:
For explanations, please consult the
Engineering TAC Xenta 511
man-
ual.
2.3.2
Power and Hyperterminal Connections
1
G
and
G0
: Supply 24 V power to terminals.
Minimum cross-sectional area 0.75 mm² (AWG-19).
All equipment that is connected to the unit must comply with the
following standards:
•
EN 60 742
(or other relevant safety standard) for the device(s)
that provide an ELV-type power supply (normally 24 V AC)
to the unit and other connected equipment.
•
EN 61 010
or
IEC 950
(or other relevant safety standard) for
computers and other equipment supplied by power line volt-
age.
Fig. 2.2: TAC Xenta 511 mounting and electrical connections
G G0 C1 C2
1 2 3 4
~ 0
24 V AC
(19-40 V DC)
}
LonWorks
comm.
Summary of Contents for Xenta 511
