TAC Xenta 511, Handbook

Page: 18 / 20

2 TAC Xenta 511 TAC Xenta® 511 and 911 Handbook
18 (42) TAC AB, Feb 2005
0-004-7870-2 (EN)
LonTalk Adapter for TAC Vista
1
Install the program LTA for TAC Vista in the same directory as
TAC Vista (ex. TAC 330).
2
Start LTA for TAC Vista .
- Select a TACLON interface
- ADD
- Enter the IP address of the intended TAC Xenta 511
- Select Port (default 1068)
- UPDATE
- EXIT
3
Connect to the TAC Xenta 511.
4
Select the LDV Server Port (default 1068) under Configuration/
LTA for TAC Vista setup and use the same value as in LTA for
TAC Vista .
2.3.7 Other Connections, Port Usage, etc.
Device Connection
Please refer to the TAC Xenta Cable Guide, 0FL-3972, for details of
connecting different devices to the TAC Xenta 511.
Port usage and Properties
• RS232 port Amodem
• RS232 port Bconfiguration, commissioning
• 10Base-TIP network
• FTT-10LonWorks network
User Administration
Users administration (user login, authority levels, etc.) is done via web
pages in the TAC Xenta 511.
Using the TCP Ports (Firewall)
If a TAC Xenta 511 and the IP network are located on opposite sides of
one or several firewalls, these firewalls must be configured to allow
traffic through.
The TAC Xenta 511 uses the following TCP/IP ports.
• Ports 20, 21ftp access (fixed, only for testing purposes)
• Port 25SMTP access
• Port 80http access
• Port 443https access
• Port 1068 (default) TAC Xenta 511