TAC Xenta 511, Handbook, Page: 9 / 20

TAC Xenta® 511 and 911 Handbook 1 Introduction
TAC AB, Feb 2005 9 (42)
0-004-7870-2 (EN)
1 Introduction
The TAC Xenta 511 and TAC Xenta 911 are communication devices,
partly based on similar hardware.
This handbook describes the hardware installation and technical data
for these devices.
For more information on applications and using the devices in net-
works, please refer to the documentation listed below.
The TAC Xenta 511 and 911, as well as other products mentioned in
this manual, must not be used for any other purposes than those for
which they were designed.
Installation, connection and repair should only be carried out by autho-
rized personnel.
1.1 Structure
The manual is divided into the following parts:
• Introduction
The Introduction section contains information on how this manual
is structured and where to find additional information.
• Reference
The Reference section contains comprehensive information about
the products. It also provides you with information on mounting
and electrical installation.
1.2 New in this Edition
In this edition there is a new section 3.3.8, “Using the TAC Xenta 911
as a Serial Gateway”.
Note
We are continuously improving and correcting our documentation.
This manual may have been updated.
Please check our Docnet site at www.tac.com for the latest version.