English
English
32
2. Connecting devices
■
Network configuration schematic diagram
Remote controller
Area of customer responsibility
LAN cable
Router
LAN port
WAN port Line terminating equipment
(modem, etc.)
Internet service
connection
Data center
■
Connecting LAN cables (Connecting LAN cables between the remote
controller and router)
1
Remove the remote controller.
1. Pull the clips at the bottom of the remote controller
toward you to separate the remote controller from the
mounting bracket.
2. Once the clips have become detached, slide the
remote controller upward.
3. Pull the remote controller toward you.
3.
2.
1.
2
Install the LAN cable.
1. Connect the LAN cable with the LAN cable connector.
2. Close the clamp around the cable.
3. If running the cable along a wall, remove the wire duct
cover.
Wire duct cover
Remote controller
cable connector
Clamp
LAN cable connector
Configuring the Connection to the Internet