20
21
English
English
■
Stand-alone Operation Startup (Power Outage)
After a power outage occurs, an error message appears on the screen and the inverter
automatically switches from grid-tied operation to stand-alone operation.
If power is restored on the commercial power grid during stand-alone operation,
the inverter automatically reengages grid-tied operation.
1
2
■
Restoration of Grid-tied Operation
3
After a power outage has been detected,
error code “gxxx” appears on the Remote
Controller.
After about 10 seconds, the Remote
Controller automatically changes the
o p e r a t i n g s t a t u s m e s s a g e t o
“STAND-ALONE MODE”.
The status lamp will light up red. Then
the electrical appliance which are
connected to the back-up breaker box
can be powered.
After a power outage has been detected,
the Remote Controller automatically
changes the operating status message to
“STAND-ALONE
→
”.
1
2
Once input from the commercial power
grid is detected, “GRID CONNECT
→
”
appears on the Remote Controller for a few
minutes.
Grid-tied operation resumes a few minutes
afterwards.
The status lamp lights up green.
Stand-alone Operation
(In a Power Outage)
GRID ABNORMALITY DETECTED.
WILL RESTART IN 5 MIN. ONCE GRID IS
BACK TO NORMAL. PLEASE CONTACT THE
SERVICE CENTER IF THE ERROR MESSAGE
CONTINUES MORE THAN 5 MIN.