Tabor Electronics Lucid LS1291B, User Manual

Page: 5 / 39

Lucid Series RF Signal Generator
Benchtop User Manual
Rev. 1.4
5
Table 4.6 Outputs Specification .................................................................................................................. 38
Table 4.7 General Specification .................................................................................................................. 38
Document Revision History
Table Document Revision History
Revision Date Description Author
1.4 04-May-2021
•
3.6.5 Update, page 32 – The “Device SW Update
Sequence” is updated.
Jakob Apelblat
1.3 26-Jan-2021
•
Supporting Lucid Benchtop SW version 1.8.15 or higher.
•
1.2 Software Support, page 10 – New.
•
Removed sections “Lucid Software Requirements”,
“Installation, “PC Control Software” , ‘Troubleshooting”,
and “FPGA Firmware Update” that are included in the
new “ Lucid Control Panel User Manual”.
•
Removed section SCPI Programming that is included in
the new “Lucid Programming Manual”.
Jakob Apelblat
1.2 10-Jan-2021
•
Supporting Lucid PC application version 1.2.900, GUI
version 1.15 or higher, and TE Update Tool version
1.0.500.
•
3 Benchtop GUI, page 18 – Reference field removed from
the status bar.
•
3.6 System Tab, page 29 – Minor updates.
•
4 PC Control Software, page 44 – Reference field removed
from the status bar.
•
5.3 IEEE-STD-488.2 Common Commands and Queries,
page 67
– Changed SE5082 to device, and OPT?
description.
•
Table 4.4 Modulation Specification, page 36 – Changed
Sweep Dwell Time from “10 μs to 1,000 s” to “100 μs to
1,000 s”.
•
8 Appendix FPGA Firmware Update, page 124 – New.
Jakob Apelblat
1.1 6-Aug-2020
•
Minor typos.
•
Table 4.2 Amplitude Specification, page 34 – Changed
Amplitude Accuracy from +50 dBm to -50 dBm.
Jakob Apelblat
1.0 30-Jul-2020
•
Original release supporting Lucid SW Rev. 1.2.12 and SPI
& SCPI Commands List Summary Rev. 1.14
Jakob Apelblat