Lucid Series RF Signal Generator
Benchtop User Manual
Rev. 1.4
21
Figure 3.4 PM
–
Phase Modulation
•
Frequency
–
Set the modulation Frequency (Hz).
•
Deviation
–
Set the phase deviation degree of the modulation frequency.
•
Push the
Mod On/Off
button on the device front panel to start the modulation and then
RF On/Off
button to output the signal.
3.2.4
Pulse Definition
Select on the device display the Modulation tab, and then click the PULSE button to show the pulse
parameters.
Note
•
The
PULSE
button is only available if the device has the Pulse option installed.
Figure 3.5 Pulse Definition
•
Width
–
Set the pulse modulation width. Use the push buttons on the front panel to select units.