Lucid Series RF Signal Generator
Benchtop User Manual
Rev. 1.4
25
•
# Steps
–
sets the number of steps in one sweep (including
Start
and
Stop
). The value displayed in
Step Size
changes accordingly.
3.3.2
Power Sweep
Select the Sweep tab, and then click the PWR button. You can now define a signal that sweeps from
one amplitude to the next, maintaining the same frequency.
Figure 3.8 Power Sweep
•
Start Power
–
start power sets the start sweep amplitude (in dBm).
•
Stop Power
–
stop power sets the stop sweep amplitude (in dBm).
•
Dwell Time
–
sets the sweep dwell time that is the duration of the entire sweep.
•
Step Size
–
sets the size of each step (in dBm) in the sweep. The value displayed in
# Steps
changes
accordingly.
•
Step Time
–
sets the step dwell time. The value displayed in
Dwell Time
changes accordingly.
•
Direction
–
sets the sweeping direction:
⧫
UPDOWN
–
to sweep from start frequency to stop frequency; then, from stop frequency to
start frequency .
⧫
NORMAL
–
to sweep from start frequency to stop frequency.
•
# Steps
–
sets the number of steps in one sweep (including
Start
and
Stop
). The value displayed in
Step Size
changes accordingly.
