Lucid Series RF Signal Generator
Benchtop User Manual
Rev. 1.4
14
•
Numeric Keypad Program 1 - 4
–
Select the channel, 1 up to 4, to show on the display.
•
Numeric Keypad
–
Enter numeric values.
•
G/n Button
–
Select GHz, nsec or dBµV units depending on selected parameter.
•
M/
µ
Button
–
Select MHz, µsec or µV units depending on selected parameter.
•
k/m Button
–
Select kHz, msec or mV units depending on selected parameter.
•
x1 Button
–
Select x1 (default unit) or dBm units depending on selected parameter.
•
Back
–
The backspace key deletes the last entered character.
•
Esc
–
Has two functions:
1.
When in edit mode, cancels edit operation, restores last value and returns to the main
function screen.
2.
When operating the device from a remote interface, none of the front panel buttons are
active except the Local button. When pressed, it restores control to front panel buttons.
•
Enter:
1.
When multiple parameters are displayed on the screen, the cursor and the dial scroll
through the parameters. Pressing Enter selects the parameter for edit. After the
parameter has been modified, the Enter button locks in the new variable and releases
the buttons for other operations.
2.
When a parameter is modified, Enter can be used to replace the x1 suffix key.
3.
When a discrete parameter is selected, Enter toggles between the values.
•
Man Trigger
–
Manual trigger button, used instead of an external trigger signal.
•
Dial
–
Turning the dial clockwise or counterclockwise works like the arrow UP and Down keys.
Pushing the dial works like the Enter button.
•
Arrow Up, Down, Left, Right
–
Has two functions:
1.
When multiple parameters are displayed on the screen, the arrow and the dial scroll
through the parameters.
2.
When a parameter is selected for editing, arrow buttons right or left move the cursor
accordingly. Arrow buttons up or down modifies parameter value accordingly.
•
FREQ Button
–
Select the frequency field in the CW (carrier wave) settings tab.
•
AMPT Button
–
Select the power field in the CW (carrier wave) settings tab.
•
FM Button
–
Select the frequency modulation screen.
•
Sweep Button
–
Select the sweep screen tab.
•
Store Button
–
Store current settings on selected memory device. Click the button to display a list
of setting files, use the dial to scroll the list and push then the dial to store the settings in the file.
•
Recall Button
–
Recall stored configuration.
