23
TRANSPORTATION BY CAR.
TA iQ is crash tested with 4 point car attachment and Dahl Docking System (accessories), so it can be used
as a seat in a car, bus or similar.
The user can use the TA iQ during transport by a car, bus or similar, if the TA iQ is equipped with TA 4
point car attachment and/or Dahl Docking system.
DANGER!!!
When the power chair is used as a seat in a car, bus or similar, it must always be attached with an
approved car attachment.
The seat and lift must always be in the lowest position when transported by car.
If a belt is mounted on the power chair, it will not replace the cars seat belt.
The cars seat belt must always be used.
4 point car attachment.
The power chair is mounted with 4 attachment
loops, which can be used together with an approved
4 point car attachment system.
These loops are marked with a hook symbol (figure
a and b)
DANGER!!!
Using 4 point car attachment the hooks must only
be attached to the 4 attachment loops on the
power chairs. Fastening the hooks elsewhere will
cause a high risk of danger to the user and
damage to the power chair.
Dahl docking system
If the Dahl docking system is to be used, a plate will
be mounted to the bottom of the power chair which
will lock into the docking system. (figure C)
If using the Dahl docking system the instructions
from Dahl Engineering must be followed closely.
Failure to follow instructions carefully will cause
a high risk of danger to the user and damage to
the power chair.
Figure A
Figure B
Figure C
Summary of Contents for 97050
Page 22: ...22...
