DXF-200 Getting Started Guide
Page 15
Instrument Specifications
The tables found below contain the technical specifications for the DXF and EM.
**Using ideal, well-defined, well-behaved 12-mm diameter samples of known properties
Table 4:
DXF Technical Specifications
Item/Area
Specifications
Dimensions
Depth 66.04 cm (26 in)
Width 53.34 cm (21 in)
Height 40.64 cm (16 in)
Weight
44 kg (96 lbs)
Power
a
a. This instrument is supplied with a power cord 2.4 m (7.75 ft) long, rated for 10A and 250V and a USA
NEMA 6-15P style plug. The TA Representative installing the instrument will provide the appropriate
power cable for the geographical location where the instrument is being installed. Connect the instrument,
computer, and monitor to wall outlets on the same circuit and make sure that the mains assigned do not
also supply power to noise generating equipment nearby, such as motors, welders, transformers, etc.
System supply voltage: 198–242 VAC (rated for 10A)
50/60 Hz.
Operating environmental conditions
Temperature: 15 to 35°C
Relative humidity: 5 to 80% (non-condensing)
Installation Category II
Pollution Degree 2
Maximum altitude: 2000 m
Pulse Source
High speed Xenon module
Table 5:
EM Technical Specifications
Item/Area
EM-200
Thermocouple Measurement
3 wire PT 100
Ω
RTD
± 0.15%
Thermal Diffusivity
Accuracy** ± 4% (worst case)
Measurement
Repeatability** ± 2% (worst case)
Temperature Range
-150 to 200°C
Atmosphere
Air, inert gas
Number of Specimens
2
Sample Dimension
12.7/25.4 mm (d) x up to 6 mm (t)
Sample Shape
Round disk, square plate (with adapters)
Solid State Detector
Assembly
8 and 10 mm diameter Intrinsic thermocouples (8, 10, 12.7
mm length Bismuth telluride [B
i2
T
e3
] pins)
