Luke
®
II Keypad Lighting
Installation Guide
4
T2 Systems, Inc.
|
T2systems.com
a. Carefully clean away any remaining metal filings.
9. Use the file to remove any burrs from the drilled holes on the cast and door panel (inside and
outside edges).
10. To prevent rust, the hole in the door must be protected with a zinc-rich paint. If using a spray,
use a mask so as to prevent over-spray onto electronic components and cables. Allow 30
minutes for the paint to dry.
A mask template is provided at the end of this document.
Summary of Contents for LUKE II
Page 1: ...LUKE II KEYPAD LIGHTING INSTALLATION GUIDE 980 0144 REV A ...
Page 15: ...1 ...