T Scale AW20, Operation Manual

Page: 42 / 56

AW20 Series Weighing Scale Operation Manual
- 37 -
7 Limits setting completed,Load the weight
on platter,the check percentage weighing
control will start .
8 To disable the check percentage weighing function,enter zero in both limits.
Notes

Check weighing available only when weight more than 20d

The function is not valid when one enters a lower limit greater than the upper limit.

When lower limits are the same with upper limits,display only shows one set value
5.12.5 Tolerance Checking Mode
Target weight checking
In normal weighing mode,press
key to
enter check weighing mode
Target quantity checking
In counting mode,press
key to enter
check counting mode
Target percentage checking
In percentage mode,press
key to enter
check percentage mode