Page 2
While many of these procedures are applicable to the T-1
and T-1 Mini jets as well, this guide is specific to the T-3
With Electric Gear Set.
This guide does not cover radio setup, programming or turbine operation. You will
need to refer to the documentation provided with those systems for information on
proper setup and operation.
T-3 ARF Kit:
•
Fuselage; Forward, Center, AFT
•
Rudder and Stab (Factory Hinged)
•
Wings, Factory Hinged Ailerons with Flaps
•
Landing Gear with struts and brakes (Electric Comes with Gear and Brake Controller)
•
Complete Hardware Package
•
Linkage and ball links
•
Dual Walled Pipe
•
Kevlar Fuel Tank/Smoke Tank Combo with Hysol in fittings
Tips for Success:
•
Don’t rush! Allow plenty of time for your build. Take your time, enjoy
it, and do it right.
•
Don’t be afraid to ask questions! In addition to this document there are several build threads on RC Universe
where you can get input and assistance with your build:
•
Complete the latter part of your build on a CG stand…when you’re down
to the components that can relocate in
order to adjust CG.
•
After your build is complete, have another turbine operator/pilot review your build. A fresh set of THIS s is a
good sanity check.
Specifications:
•
Length: 118”
•
Wing Span: 103”
•
Fuel Tank 256oz
•
Smoke Tank 60ozDry Weight 45-48Lbs
•
Recommended Engine 180-260
•
Center of Gravity: 335mm - 345mm from leading edge of wing root.
•
Recommended Aileron Throw: 18-20mm
•
Recommended Elevator Throw: 20-25mm
•
Recommended Rudder Throw: 25mm
•
Recommended Flap Throw: Half flaps = 35mm, Full flaps = 65mm
•
Recommended Flap Throw: Half flaps = 45mm, Full flaps = 70mm
